Port Cargo Handling Accidents and Field Checks
Updated
Collisions with transport equipment were the most common cause of death in Korean port cargo handling from 2011 to June 2021. They accounted for 21 of the 64 accident deaths (32.8%), according to the December 2022 issue of Safety and Health, the monthly magazine of the Korea Occupational Safety and Health Agency (KOSHA). Port cargo handling moves heavy, long cargo with cranes, forklifts, and transport vehicles through the same space where people work on foot, and vessel schedules keep the pace tight.
Current as of July 13, 2026.

Illustrative image
Port cargo handling deaths by type, 2011-2021

Illustrative image
| Accident type (2011 to June 2021) | Deaths | Share of deaths |
|---|---|---|
| Collision with transport equipment | 21 | 32.8% |
| Falls | 14 | 21.9% |
| Struck during maintenance, repair, or installation | 10 | 15.6% |
| Struck by handled cargo | 8 | 12.5% |
| Crushed by containers | 7 | 10.9% |
| Oxygen deficiency | 3 | 4.7% |
| Electric shock | 1 | 1.6% |
| Total | 64 | 100% |
Source: KOSHA, monthly Safety and Health, December 2022, p. 6.
Collisions and crushing happen while equipment and cargo are moving. Start a review of accident causes by checking routing and access control.
Checks that start with routing

Illustrative image
- Physically separate vehicle and equipment routes from pedestrian zones; post signalers and traffic rules where they cross.
- Map the blind spots where workers disappear from an operator's view, and set stop-before-entry rules there.
- Check fall protection at elevated access points: container tops, hatches, ladders.
- Control the zone before maintenance or repair begins, and confirm worker positions before restarting equipment.
- Keep exclusion lines under suspended cargo and around container stacking zones.
- Record findings, completed fixes, and the owner of each item, then re-verify at the next inspection.
For new-worker training, the Korea Occupational Safety and Health Agency (KOSHA) publishes material for the port cargo-handling industry (public data portal).
Related case: STS crane rotating equipment condition monitoring case
The inspection order for work at height is covered in the field-guide special edition Construction Falls: 2025 Data and the First Ruling.


